English
  • calanka 8

Saliidda Nadiifinta Sareysa ee Bilaashka ah Compressor Helium Oxygen Hydrogen Compressor

Saliida Nadiifinta Sare ee Bilaashka ah Compressor Helium Oxygen Hydrogen Compressor Sawirka
  • Saliidda Nadiifinta Sareysa ee Bilaashka ah Compressor Helium Oxygen Hydrogen Compressor
  • Saliidda Nadiifinta Sareysa ee Bilaashka ah Compressor Helium Oxygen Hydrogen Compressor
  • Saliidda Nadiifinta Sareysa ee Bilaashka ah Compressor Helium Oxygen Hydrogen Compressor

Sharaxaad Gaaban:


  • Nooca qaabdhismeedka:Nooca V
  • Heerka Socodka:2-100nm3/H
  • Safarka Piston:70-130mm
  • Awoodda Baabuurka:2.2kw-30kw
  • Cadaadiska Bixinta ugu badan:50MPa
  • Qalab:Bir daxal laheyn
  • Faahfaahin:1600*776*1080mm
  • Xidhmada Gaadiidka:Fumigation Wooden Box by Badda
  • Awoodda Wax-soo-saarka:500 Set / Sannad

    • Faahfaahinta Alaabta

    Tags Product

    Isku-soo-noqoshada Diaphragm/Piston Compressor oo Dhamaystiran oo Saliid La'aan ah
                                                   

    Shirkaddayadu waxay ku takhasustay samaynta noocyada kala duwan ee kombaresarada, sida:kombaresarada diaphragm,Piston kombaresaradakombaresarada hawada,dhaliye Nitrojiin,dhaliyaha ogsijiinta,Dhululubada gaaskaiwm.Dhammaan alaabooyinka waxaa lagu habeyn karaa iyadoo loo eegayo xuduudahaaga iyo shuruudaha kale.

    Compressor-ka diaphragm waa kombaresarada mugga ee qaab-dhismeed gaar ah.Waa habka cadaadiska heerka ugu sarreeya ee goobta cadaadiska gaaska.Habkan cadaadisku ma laha wasakhda labaad.Waxay difaac aad u wanaagsan u leedahay gaaska ciriiriga ah.Shaabadeynta wanaagsan, gaaska ciriiriga ah laguma wasakheeyo saliidda saliidda iyo wasakhda kale ee adag.Sidaa darteed, waxay ku habboon tahay in lagu cadaadiyo nadiif sare, qaali naadir ah, gubasho iyo qaraxyo, sun iyo waxyeello, daxal, iyo gaasta cadaadiska sarreeya.
    kombaresarada diaphragm waa nooc ka mid ah kombaresarada qadiimiga ah ee iscelinaya oo leh gurmad iyo faraanti piston iyo shaabad ul ah.Cadaadiska gaasku wuxuu ku yimaadaa xuubka dabacsan, halkii uu ka ahaan lahaa curiye qaadashada.Xuubka dhaqaaqa ee gadaal iyo gadaal waxaa kaxeeya ul iyo farsamo-muraayad.Xuubka iyo sanduuqa kombaresarada oo kaliya ayaa la soo xiriira gaaska la shubay.Sababtan awgeed dhismahani waa kan ugu habboon in lagu shubo gaasaska sunta ah iyo kuwa qarxa.Xuubku waa inuu noqdaa mid la isku halayn karo oo ku filan si uu u qaato cadaadiska gaasta la shubo.Waa inay sidoo kale lahaataa sifooyin kiimiko oo ku filan iyo iska caabin heerkul ku filan.
    Compressor-ka diaphragm wuxuu inta badan ka kooban yahay matoor, saldhigyo, sanaadiiqda birta, biraha isku xira shafka, qaybaha dhululubada, dhuumaha saliidda iyo gaaska, nidaamyada kontoroolka korantada, iyo qalabyada qaarkood.

    Compressor diaphragm

    Compressor-kaiswuxuu ka kooban yahay asaddex qaybood oo diaphragms ah.Diaphragm-ka waxaa ku dheggan aagga ku hareeraysan dhinaca saliidda biyo-biyoodka iyo dhinaca gaasta ee habka.Diaphragm-ka waxaa wadaa darawalka hydraulic ee madaxa filimka si loo gaaro cadaadiska iyo gaadiidka gaaska.Jidhka ugu muhiimsan ee kombaresarka diaphragm wuxuu ka kooban yahay laba nidaam: nidaamka saliidda hayrooliga iyo nidaamka cadaadiska gaaska, iyo xuubka birta ayaa kala soocaya labadan nidaam.

    kombaresarada diaphragm

    kombaresarada gaaska diaphragm

    GV taxane diaphragm kombaresarada:

    Nooca qaab dhismeedka: Nooca V

    Safarka Piston: 70-130mm

    Awoodda ugu badan ee Piston: 10KN-30KN

    Cadaadiska ugu sarreeya: 50MPa

    Heerka socodka: 2-100Nm3/saacaddii

    Awoodda Mootada: 2.2KW-30KW

    La habeeyey waa la aqbalayPls na sii macluumaadka soo socda:

     

    1. Heerka socodka: _______Nm3/h

     

    2.Gaaska Warbaahineed: ______ Hydrogen ama Gaaska Dabiiciga ah ama Ogsajiinta ama gaas kale?

     

    3. Cadaadiska gudaha: ___bar(g)

     

    4. Heerkulka galitaanka:_____℃

     

    5.Cadaadiska dibadda：____bar (g)

     

    6.Heerkulka dibadda:____℃

     

    7. Goobta lagu rakibay: _____ gudaha ama dibadda?

     

    8.Location heerkulka deegaanka: ____℃

     

    9.Awoodda: _V/ _Hz/ _3Ph?

     

    10. Habka qaboojinta ee gaaska: qaboojinta hawada ama qaboojinta biyaha?

     

    WIDE kala duwan iyo noocyada kombaresarada diaphragmwaxaa soo saari kara shirkadeena sida kombaresarada hydrogen , kombaresarada nitrogen , kombaresarada helium , kombaresarada gaaska dabiiciga ah iyo iwm.

     

    Cadaadiska dibadda ee 50bar 200 bar, 350 bar (5000 psi), 450 bar, 500 bar, 700 bar (10,000 psi), 900 bar (13,000 psi) iyo cadaadis kale ayaa la habeyn karaa.


    Shaxda Model GV

    Tirada Qaabka Isticmaalka biyaha qaboojinta (t/saac) Mugga daalka
    Nm3/h)    		 Cadaadiska qaadashada
    (MPa)    		 Cadaadiska daalka
    (MPa)    		 cabbir guud
    LxWxH(mm)    		 Miisaanka
    (t)    		 Awoodda matoorka
    (KW)
    Istaroogga piston ee alaabta soo socota waa 70mm
    1 GV-8/8-160 0.5 8 0.8 16 1310x686x980 0.65 3
    2 GV-10/6-160 0.8 10 0.6 ~ 0.7 16 1200x600x1100 0.5 4
    3 GV-10/8-160 0.8 10 0.8 16 1330x740x 1080 0.65 4
    4 GV-10/4-160 0.8 10 0.4 16 1330x740x1000 0.65 4
    5 GV-7/8-350 0.8 7 0.8 16 1300x610x920 0.8 4
    6 GV-15/5-160 0.8 15 0.5 16 1330x740x920 0.7 5.5
    7 GV-5/7-350 1 5 0.7 35 1400x845x1100 0.8 5.5
    Istaroogga piston ee alaabta soo socota waa 95mm
    8 GV-5/200 0.4 5 Cadaadiska caadiga ah 20 1500x780x1080 0.75 3
    9 GV-5/1-200 0.3 5 0.1 20 1520 x 800 x 1050 0.75 3
    10 GV-11/1-25 0.6 11 0.1 2.5 1500x780x1080 0.85 4
    11 GV-12/2-150 1 12 0.2 15 1600x776x1080 0.75 5.5
    12 GV-20/W-160 0.8 20 1 16 1500x800x 1200 0.8 5.5
    13 GV-30/5-30 0.8 30 0.5 1 1588x 768 x 1185 0.98 5.5
    14 GV-10/1-40 0.4 10 0.1 4 1475 x 580x1000 1 5.5
    15 GV-20/4 0.6 20 Cadaadiska caadiga ah 0.4 1500x900x1100 1 5.5
    16 GV-70/5-10 1-5 70 0.5 1 1595 x 795 x 1220 1 5.5
    17 GV-8/5-210 0.4 8 0.5 21 1600 x 880x1160 1.02 5.5
    18 GV-20/1-25 0.4 20 0.1 2.5 1450 x 840x1120 1.05 5.5
    19 GV-20/10 - 350 1.2 20 1 35 1500x750x1140 0.8 7.5
    20 GV-15/5-350 1-05 15 0.5 35 1600 x 835x 1200 1 7.5
    21 GV-20/8-250 1.2 20 0.8 25 1520x825x1126 1 7.5
    22 GV-12/5-320 1.2 12 0.5 32 1600 x 835x 1130 1 7.5
    23 GV-15/8-350 1.1 15 0.8 35 1520x820x1160 1.02 7.5
    24 GV-18/10-350 1.2 18 1 35 1255 x 800 x 1480 1.2 7.5
    25 GV-35/4-25 0.3 35 0.4 2.5 1500x810x1100 1 7.5
    26 GV-50/6.5-36 2.25 50 0.65 3.6 1450x850x1120 1.048 7.5
    27 GV-20/5-200 1-2 20 0.5 20 1500x780x1080 0.8 7.5
    Stroke piston ee alaabta soo socota waa 130mm
    28 GV-20/3-200 1.2 20 0.3 20 2030 x 1125 x 1430 1.8 15
    29 GV-25/5 -160 1.2 25 0.5 16 1930 x 1150 x 1450 1.8 15
    30 GV-40/0.5-10 1.2 40 0.05 1.00 2035 x 1070 x 1730 1.8 15
    31 GV-20/200 1.2 20 Cadaadiska caadiga ah 20 1850 x 1160 x 1400 1.85 15
    32 GV-90/30-200 1.2 90 3 20 2030 x 970 x 1700 1-8 22
    33 GV-30/8-350 2.4 30 0.8 35 2030 x 1125 x 1430 1.8 22
    34 GV-30/8-350 2.4 30 0.8 35 2040 x 1125 x 1430 1.8 22
    35 GV-60/10-160 3 60 1 16 1800 x 1100 x 1400 1.8 22
    36 GV-60/5-160 3 60 0.5 16 2030 x 1125 x 1430 1.8 22
    37 GV-40/10-400 2 40 1 40 2000 x 1150 x 1500 1.8 22
    38 GV-60/10-350 2.4 60 1 35 2070 x 1125 x 1430 1.8 22
    39 GV-30/5-350 2 30 0.5 35 1900 x 1130 x 1450 2 22
    40 GV-40/2.5-160 2 40 0.25 16 1900 x 1130 x 1450 2 22
    41 GV-150/3.5-30 2 150 0.35 3 1900 x 1130 x 1450 2 22
    42 GV-70/2.5-80 2 70 0.25 8 1880 x 1060 x 1400 2.12 22
    43 GV-80/2.5-80 2 80 0.25 8 1880 x 1060 x 1400 2.12 22
    44 GV-120/3.5-12 3.6 120 0.35 1.2 2030 x 1045 x 1700 2.2 22
    45 GV-100/7-25 1.2 100 0.7 2.5 2030 x 1045 x 1700 1.9 30
    46 GV-50/5-210 2 50 0.5 21 1900 x 1130 x 1450 2 30
    47 GV-80/5-200 2 80 0.5 20 1900 x 1130 x 1450 2 22
    48 GV-40/5-350 2 40 0.5 35 1900 x 1130 x 1450 2 30

    Bandhig sawir

    GV9

    IMG_20180525_172802

    IMG_20181128_111924(1)

    GV

    相关产品

    证书

    包装

     

    微信图片_20221020092911

    RFQ

    1.Sidee loo helaa oraah degdeg ah ee kombaresarka gaaska?

    1) Heerka socodka/Awoodda socodka: ____ Nm3/saacaddii

    2) Nuugista/ Cadaadiska Gudaha: ____ Bar

    3) Cadaadiska Bixinta/Wararka:____ Bar

    4) Dhexdhexaadka gaaska :____

    5) Voltage iyo Joogtada: ____ V/PH/HZ

     

    2.Intee in le'eg ayay tahay wakhtiga dhalmada?

    Waqtiga keenista waa ku dhawaad ​​30-90 maalmood.

     

    3.What ku saabsan danab alaabta?Ma la beddeli karaa?

    Haa, danabku waa la beddeli karaa iyadoo loo eegayo weydiintaada.

     

    4.Ma aqbali kartaa amarrada OEM?

    Haa, dalabaadka OEM si weyn ayaa loo soo dhaweynayaa.

     

    5.Ma bixin doontaa qayb ka mid ah qaybaha firaaqada ee mishiinnada?

    Haa, waan sameyn doonaa.

     

     

  • Hore:
  • Xiga:
    • Halkan ku qor fariintaada oo noo soo dir

    Alaabooyinka la xidhiidha

    Ku dhufo geli si aad u baadho ama ESC si aad u xidhid